Up (command)

Created by Yuriy Andamasov, Modified on Wed, 17 Jan 2024 at 04:09 PM by Srividya Anantapatnaikuni

Article review date	2024-01-17
Validated for VyOS versions	1.2.5, 1.3.5, 1.4.0, 1.5.x

The `up` command allows you to navigate one level higher in the configuration tree. To get to the top, you can either use the `up` command repeatedly or simply use the `top` command. To navigate down in the tree, use the `edit` command.

Syntax

[edit interfaces ethernet eth0]
vyos@vyos-rtr# up
[edit interfaces]
vyos@vyos-rtr#

Examples

[edit interfaces ethernet eth0 vif 222 ip]
vyos@vyos-rtr# up
[edit interfaces ethernet eth0 vif 222]
vyos@vyos-rtr# up
[edit interfaces ethernet eth0]
vyos@vyos-rtr# up
[edit interfaces]
vyos@vyos-rtr# up
[edit]
vyos@vyos-rtr#